PARTS for Nause
LP880 / LP1080 / 880 / 1080 / 1280 / and 1580 RUNNING GEARS
| Parts for 8 Bolt Northfield 778 Hubs | ||
| Inner Cone, Bearing #25590 | ||
| Inner Cup, #25520 | ||
| Outer Cone, Bearing, #25877 | ||
| Outer Cup, #25821 | ||
| Seal, #20148 | ||
| Spindel Washer, 2.25″ OD x 0.94″ ID X 0.169″ Thk | ||
| Slotted Hex Nut 7/8-14 X 3/4 Tall | ||
| Cotter Pin, 3/16″ x 2 1/4″ | ||
| Hubcap, 3.153 x 1.468 x .312 #1531
Wheel Stud 9/16-18 X 2.5″ Long |
||
| Wheel Nut, 9/16″-18, Yellow Zinc, Hex | ||
| WHEEL / GKN – W51350P25 / 15X10 Whl | ||
| 8-8-6 offset +1.125 | ||
| WHEEL / GKN – W68660P25 / 16.5X9.75 Whl
8-8-6 offset +1.125 |
||
| Tie Rod End ES176L | ||
| Tie Rod End ES176R | ||
Parts for 6 Bolt Northfield 890 Hubs
Inner Cone, Bearing #LM501349
Inner Cup #LM501310
Outer Cone Bearing #LM67048
Outer Cup, #LM67010
Seal, # 22368
Spindel Washer, 1.769 OD X .955 ID X .136 Thk SAE,
Slotted Nut 7/8″-14 X 3/4″ Tall
Cotter Pin, 0.15″ x 1.50″
Hubcap, 2.438 X 1.72 X .29 #1604
Wheel Stud 9/16-18 X 2.5″
Wheel Nut, 9/16″-18, Yellow Zinc, Hex
WHEEL – GKN / W50334P25 / 15X8LB Whl 6-6-4.62
offset +1.125 Used on Model 880
WHEEL – GKN / W50534P25 / 15X10LB Whl 6-6-4.62 Bolt offset +1.125
WHEEL – GKN / W66038P25 / 16.5 X 9.75 WHL 6-6-4.62 offset +1.125
WHEEL – GKN / W128028RP25 / 12X10.5 Wheel 6-6-4.62 offset -0.375 Low Profile /Feeder Application
Tie Rod End ES150L
Tie Rod End ES150R